Metra Electronics Car Satellite Radio System 95 7866B User Manual

INSTALLATION INSTRUCTIONS FOR PART 95-7866B  
APPLICATIONS  
ACURA MDX 2001-2006  
95-7866B  
KIT FEATURES  
• Double DIN Head Unit Provision  
• ISO Stacked Head Unit Provision  
• Painted Matte Black to Match Factory Dash  
KIT COMPONENTS  
A) Double DIN Radio Housing • B) DDIN Brackets (To hold Display above radio)  
B
A
WIRING AND ANTENNA CONNECTIONS  
(Sold Separately)  
• 70-1721 Honda harness - 1998-up  
• 40-HD10 -Honda antenna adapter- 2005-up  
TOOLS REQUIRED:  
Small Flat Blade Screwdriver/ Panel Removal Tool  
• Phillips Screwdriver • Socket Wrench  
1-800-221-0932  
© COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION  
 
95-7866B DASH DISASSEMBLY  
ACURA MDX 2001-2006  
A
Disconnect the negative battery  
terminal to prevent an accidental  
short circuit.  
1
2
3
Unclip and remove trim panel around  
radio/display including a/c vents.  
(Figure A)  
Remove (6) mounting screws and  
remove the audio/display unit from  
the dash. (Figure B)  
4
Remove (8) screws from the audio  
unit and (4) screws from the display  
unit and remove the brackets from  
the audio/display assembly.  
Continue to kit preparation.  
B
1
 
95-7866B KIT PREPARATION  
DISPLAY UNIT ASSEMBLY  
*Note: Refer also to the instructions included with the aftermarket radio.  
A
Using the mounting screws from the  
display unit, attach the brackets  
supplied with the kit by aligning the  
guide pins on the display with the  
holes on the brackets. (Figure A)  
1
2
Align guide pins on bottom of display  
unit with holes on top of housing and  
attach the unit to the housing using  
the (2) screws previously removed.  
(Figure B)  
Continue to kit assembly.  
B
2
 
95-7866B KIT ASSEMBLY  
DOUBLE DIN HEAD UNIT PROVISION/  
ISO STACKED HEAD UNIT PROVISION  
*Note: Refer also to the instructions included with the aftermarket radio.  
A
1
2
Locate the factory wiring harness in  
the dash. Metra recommends using  
the proper mating adapter from  
Metra or AXXESS. Re-connect the  
negative battery terminal and test  
the unit for proper operation.  
Slide the Double DIN head unit or  
stacked ISO head units into the  
bracket/radio housing assembly and  
secure the Double DIN head unit or  
stacked ISO head units to the  
assembly using the screws supplied  
with the radio. (Figure A)  
3
Reassemble dash in reverse order of  
disassembly.  
3
 
95-7866B  
NOTES  
4
 
95-7866B  
NOTES  
5
 
95-7866B INSTRUCTIONS  
1-800-221-0932  
REV. 08/24/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST99-7866B  
 

La Crosse Technology Portable Radio WS 7076U User Manual
Lancom Systems Server LCOS 350 User Manual
LevelOne Network Hardware FSW 1670TX User Manual
Lucent Technologies Switch Lucent Compact Switch User Manual
Makita Trimmer UH303D User Manual
Marmitek Computer Hardware CM15PRO User Manual
Maytag Clothes Dryer MDG9206AWW User Manual
Melissa Hot Beverage Maker 245 029 User Manual
Meyer Automobile Accessories 3116 User Manual
Middleby Marshall Oven PS740E User Manual