HDMI 4x4 Matrix Switch
Quick Start Guide
English
LINDY No. 32595
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (July 2007)
1. IR in socket:
Plug the optional IR extender in to the socket for IR extension control
2. RS-232 Communication port:
Connect to the COM port of your PC for control over the RS-232 channel
3. HDMI Outputs:
Connect each of these outputs to the HDMI inputs of your display
4. HDMI Inputs:
Connect your HDMI sources such as DVD player or set top box to these inputs
5. Power:
Plug the 5VDC power supply into the unit and connect the PSU to the wall outlet
4. Remote Control
1. Power:
Turn the unit on/off
2. Input select for HDMI out A:
Press 1,2,3 or 4 to select the
desired input to be displayed
3. Input select for HDMI out B:
Press 1,2,3 or 4 to select the
desired input to be displayed
4. Input select for HDMI out C:
Press 1,2,3 or 4 to select the
desired input to be displayed
5. Input select for HDMI out D:
Press 1,2,3 or 4 to select the
desired input to be displayed
5. Specifications
•
Frequency bandwidth: 1.65Gbps (Single Link)
Input/output: 4 in to 4 out HDMI female ports
5V DC power supply
•
•
•
•
Dimensions: 438 x 175 x 49 (WxDxH)
Weight: 3.1Kgs
6. Connection & Installation
Blu-ray Player
Set Top Box
PS3
DVD
7. RS-232 Control Protocol
4x4 HDMI Matrix
Remote Controller
•
•
•
•
•
RS-232 transmission format:
Baud Rate: 9600bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
CE Statement
This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and
it is equipped with the CE mark. This unit has to be used with high quality shielded connection cables. Only if these high
quality shielded cables are used it can be sure that the EMC compatibility is not adversely influenced.
FCC Statement
Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission
regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
ꢀ
ꢀ
ꢀ
ꢀ
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could
void your authority to operate the equipment.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and
electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these
products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways.
Please follow your national law when you want to dispose of any electrical or electronic products.
LINDY No. 32595
|