Lindy Network Card 51143 User Manual

MANL-SIL3124-EN-20051010  
U s e r M a n u a l  
Introduction  
The Silicon Image Sil3124 Serial ATA I/II to PCI Host Controller Card is a high performance,  
server class storage interface device, which provides a multi-port SATA connectivity to  
minimize the host overhead and the host to device latency. It also supports the latest NCQ  
hard disks. With this NCQ feature, the hard disks perform more efficient, which means higher  
performance and longer lifetime of the hard disks.  
Features  
ò
ò
Compatible to PCI Specification  
Support data transfer rate 3Gb/s (SATA II) for chipset Sil3124-2 and 1.5Gb/s (SATA)  
for chipset Sil3124-1  
ò
ò
ò
ò
Backward compatible to SATA 1.0a specification  
Support hard disks with Native Command Queue (NCQ) feature  
Support 4 independent SATA ports  
Capability to connect to a Port Multiplier (e.g. Sil3726) on each port with FIS based  
switching  
ò
ò
ò
Hot plugging supported  
Support Raid 0, 1, 5 and 10  
Windows NT4.0, 2000, XP, Vista, Server 2003, Linux supported  
Before the installation of the controller card, let us make the following assumptions:  
1. The end users must have the basic knowledge of installing an internal device and its driver to a  
PC. If they are not sure about their abilities or have any queries, please call their local dealers  
immediately, or find somebody who are experienced and qualified for assistance.  
2. The computer has been properly installed with our supported Windows operating system  
WARNING  
Before installing and activating RAID function, please make sure  
you have a complete backup of your existing data from your hard  
drives. Manufacturer is not responsible for data loss due to abuse,  
misuse, or neglect. Should you have any installation problem,  
please contact your dealer for assistance.  
Installing the controller card into the computer  
1. Turn off your computer and all external devices connect to it  
2. Disconnect your computer from the power sources.  
3. Open the computer case. Refer to your computer user manual for more details.  
4. Find an available PCI slot and remove the slot bracket. Save the bracket screw for later use.  
5. Align the controller card horizontally with respect to the slot and insert it into the slot firmly and  
evenly. Take care not to force it into the slot. Once you have properly positioned the controller  
card into the slot, fasten it to the computer case with the screw you have just saved.  
6. Mount the hard disk(s) on the computer case  
7. Connect the power cable to the hard disk(s)  
8. Connect the hard disk(s) to the controller card with the SATA card  
9. Secure the computer case and switch on your computer.  
 

La Crosse Technology Portable Radio WS 9046U User Manual
Lennox Hearth Indoor Fireplace EBVI25 User Manual
LST Smoke Alarm 6500R User Manual
Lucent Technologies Answering Machine Voice FAX Messaging User Manual
Makita Cordless Saw JR14ODWA User Manual
Makita Drill 7104L User Manual
Makita Planer 10170 User Manual
Makita Power Hammer HM1242C User Manual
Melissa Automobile Parts 646 056 User Manual
Memorex MP3 Player Mi4014 User Manual