USB to DVI-I Adapter
User Manual
English
LINDY No. 42883
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (June 2008)
User Manual
English
Introduction
Thank you for purchasing the LINDY USB to DVI-I Adapter. The USB to DVI-I Adapter allows
you to connect any DVI or VGA monitor, LCD or Projector to your PC or notebook. Thanks to
high speed USB 2.0 technology, there is no need to add additional graphics cards to your
computer, with the LINDY USB DVI-I Adapter you can add up to 6 additional displays!
Typical Applications:
Office workstation:
- View your large spreadsheets across two screens with display continuity
- Multitask more effectively without overlapping windows
- Open attachments on one screen while reading e-mail on the other
On the road:
- Use multiple screen displays for presentations without bringing another computer
Graphics workstation:
- Use a second display for pallets/tools
Editing workstation:
- Type documents on one screen while viewing reference material on the other
Finance:
- Use with a notebook for viewing multiple screens
- View charts and live data at the same time
Entertainment:
- View videos/TV on one screen and reviews on the other
Minimum System Requirements
•
•
•
•
•
•
Pentium 4/Celeron family or AMD K6/Athlon/Duron family with 1.5GHz
For attaching a single adapter: 256MB RAM or Higher
For attaching multiple adapters: 512MB RAM or Higher
DVI or VGA compatible Display
Available USB 2.0 port
Windows OS 2000/XP/Vista
Package Contents
•
•
•
•
•
USB to DVI-I Adapter
USB 2.0 Cable
DVI to VGA Adapter
Driver/Manual CD
LINDY Manual
3
User Manual
English
Installation
NOTE: You must install the driver before attaching the USB to DVI-I Adapter to your
computer!
1. Insert the driver CD into your CD-Rom drive and follow the on screen instructions
2. Once the installation has finished you must restart your computer to begin using the
adapter. If you are installing more than one USB DVI-I Adapter (maximum 6) you will need
to repeat the installation process by installing the driver and then connecting each adapter
individually; completing each installation before installing the next adapter. When you have
installed all the adapters please restart your computer
3. Turn on the power to your 2nd monitor and connect it to the USB to DVI Adapter (If you are
using a VGA monitor/projector please use the supplied DVI to VGA adapter)
4. Plug the USB to DVI Adapter into an available USB 2.0 port on your computer
5. Once the computer has rebooted the extended desktop will display on the 2nd display
To make sure the USB to DVI-I Adapter(s) has been installed successfully, use the following
steps:
Go to the Control Panel, and select System, then select Device Manager.
When in Device Manager double click Display Adapters, and you should see two new devices
(for each adapter installed).
USB 2.0 Graphics Device-1 (Extend)
USB 2.0 Graphics Device-1 (Mirror)
You can also check the installation under Universal Serial
Bus controllers; this should show one new device (for each
adapter installed).
USB 2.0 Graphics Device-1
USB 2.0 Graphics Device-2*
(*If a second Adapter is installed and so on up to Device-6)
4
User Manual
English
Display Utility
Once the driver has been installed and the computer has
rebooted, the display utility will appear on the taskbar. This utility
allows you to quickly change the settings and resolution of your
USB to DVI-I Adapter. To access the menu, right click on the
icon.
Extended Mode
The default setting for the USB to DVI-I Adapter is the extended setting. To change this setting
or change the resolution, right click on the display utility icon and then choose one of the
available options.
You can change the position of the extended display in the Display Properties section of
Windows, please refer to page 6 for more information.
Primary Mode
To use the USB to DVI-I Adapter as the main display, right click on the display utility icon on the
taskbar and select Primary. Your main display (monitor) will automatically switch to being the
secondary display and show the extended desktop.
You can also choose the resolution you want to use by selecting this in the display utility
application.
5
User Manual
English
Mirror Mode
You can use the USB to DVI-I Adapter to mirror your Windows desktop. Right click on the
display utility icon on the taskbar and select Mirror. Your main display and the extended display
will show the same image.
Off Mode
Right click on the display utility icon on the taskbar and select Off to disable the USB to DVI-I
Adapter.
Display Properties
Windows 2000/XP
To edit the Display Properties for the USB to DVI-I
Adapter, go to Control Panel, double click on the
Display icon and then select the Settings tab. Click
on the Display pull down menu and select the USB
2.0 Graphics Device-1. From here, you can change
the resolution and colour depth as desired. Click OK
to apply the settings.
Windows Vista
To edit the Display Properties for the USB to DVI-I
Adapter, right click on your desktop and choose
Personalise and choose Display properties. Click on
the Display pull down menu and select the USB 2.0
Graphics Device-1. From here, you can change the
resolution and colour depth as desired. Click OK to
apply the settings.
6
User Manual
English
Frequently Asked Questions (FAQ)
Q: I am unable to make the USB to DVI Adapter the primary display!
A: Some video cards ship their product with a utility that prevents other video cards from being
set as the primary card. Check the bottom right hand corner taskbar for this utility and disable it
before switching the USB to DVI-I Adapter to the primary display.
Q: Why won’t my DVD player work when I move it over to the extended display?
A: Some DVD playback software packages do not support playing on a second display adapter
of any kind.
Q: How come my video will not play on Media Player if I move it over to the extended desktop?
A: Check that you have moved the Media Player window completely over to the second screen.
Q: Why does my mouse not move to the right side of the screen as it should on the extended
desktop?
A: Check the Display Settings (page 6) and make sure that your display number ‘2’ is on the
right side of display number ‘1’. You can rearrange how Windows treats each display in relation
to each other in the Display Properties Settings.
Q: There are lines running horizontally up and down my screen.
A: This is due to a low refresh rate setting. You can change this setting by going to the Display
Settings (Page 6) and then selecting Advanced and then the Monitor tab. Make sure you
select the USB 2.0 Graphics Device-1 first and set the refresh rate no higher than your monitor
can support as this may damage your monitor. You can also try to reset/refresh/resynchronize
your monitor.
Q: Why won’t the Adapter work on Windows Vista 64 bit version?
A: Currently, the driver is compatible with Windows Vista 32 bit version only. Please check the
LINDY website for any driver updates.
Troubleshooting Tips
The following troubleshooting tips may help if you are experiencing any issues. Contact LINDY
for additional help if needed.
•
•
•
•
•
•
•
•
•
•
•
Check to make sure that all connectors are plugged in correctly.
Make sure that the USB port that you are using is USB 2.0.
Check to see that the monitor is connected correctly and the power is ON.
Try connecting the adapter directly to the computer instead of through a hub.
Unplug all other USB devices from the system.
Make sure you restart your computer after the driver installation.
Unplug the adapter and re-insert it.
Try a different USB 2.0 port and/or computer
Check the website to make sure you have the latest drivers.
Reset/refresh/resynchronize your monitor.
If you have problems during the boot up process, start your computer in Safe Mode and
uninstall the driver. Hold the CTRL key until the Windows start up menu appears and
select Safe Mode.
•
The main display may have been disabled in Device manger when selecting the USB to
DVI Adapter as the primary display.
7
CE/FCC & Recycling Information
CE Certification
This equipment complies with the requirements relating to electromagnetic compatibility, EN55022/EN55024 class B for
IEC/EN61000-4-2/3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of
the Member States relating to electromagnetic compatibility.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must
enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please
follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from
your national WEEE recycling agency.
Germany
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und das Recycling von
Elektro- und Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung im Elektro- und Elektronikgerätegesetz –
ElektroG in deutsches Recht umgesetzt. Dieses Gesetz verbietet vom 24.März 2006 an das Entsorgen von entsprechenden,
auch alten, Elektro- und Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw.
örtlichen Sammelstellen zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren
Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement électrique et
électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières légèrement
différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques ou électroniques de
votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici ed elettronici.
Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate. Ogni stato membro dell’ EU ha
tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del proprio Stato quando si dispone di un
apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
LINDY No. 42883
1st Edition June 2008
|