USB 2.0 Smart Transfer Cable
User Manual
English
LINDY No. 42617
For Home and Office Use
Tested to Comply with
FCC Standards
© LINDY ELECTRONICS LIMITED
&
LINDY-ELEKTRONIK GMBH
-
FIRST EDITION (MAR 2010)
English Manual
English 3
Hardware Installation
OR
The device LED status (if applicable):
Blinking: Connected to computers.
Lighted: Data transferring or functions activity.
* Please connect the device’s “R” connector to PC2 and “L” connector to PC1.
English Manual
English 4
AP Installation of Smart Transfer Cable with KM Switch
Windows
A. XP
1. ICON PLAY: Turn on your computers and connect the KM Switch with your two computers
(when prompted to restart your computer, click Yes to restart your system for the
configuration changes). Please click KMDS icon of both computers to activate from pop-up
screen.
2.
Afterward the icon
appears from taskbar to indicate ready status. If you click Exit
to leave or unplug KM Switch, you can double-click KMDS icon from MY COMPUTER to
activate again.
3. AP PLAY: Please connect the KM Switch with your two computers (when prompted to
restart your computer, click Yes to restart your system for the configuration changes). The
pop-up screen appears as below.
Please double-click
to install by following the installation procedures.
English Manual
English 5
3.1 When the Welcome screen appears, click Next.
3.2 Create a desktop icon.
3.3 Click Install to start the installation.
English Manual
English 6
3.4 When the following screen appears, click Finish.
2.5 When the
icon appears on desktop and a small icon
appears from taskbar, the
installation is completed.
2.6 Please double click
from desktop to activate KMDS if needed. (*The small icon
indicates the ready status. **After installation is completed, the AP is in your computer. The
KMDS can be automatically activated but please connect KM Switch with your computers before turn on
computers. ***If you exit the function or unplug KM Switch, you can click KMDS from the desktop to activate).
B. Vista / Win 7
1.
ICON PLAY: Turn on your computers and connect the KM Switch with your two
computers (when prompted to restart your computer, click Yes to restart your system for the
configuration changes). Please open COMPUTER and then click KMDS for both computers.
Please click KMDS icon of both computers to activate.
English Manual
English 7
Afterward the icon
appears from taskbar to indicate ready status. If you click Exit
to leave or unplug KM Switch, you can click KMDS from COMPUTER to activate again.
2. AP PLAY: Please connect the KM Switch with your two computers (when prompted to
restart your computer, click Yes to restart your system for the configuration changes). Click
COMPUTER to pop-up the screen to find the AP files: 1)KMDS and 2)RAM Disk. Please click
KMDS from the screen.
2.1 Please double-click
to install KMDS by following the installation procedures.
English Manual
English 8
When the
icon appears on desktop and a small icon
appears from taskbar, the
installation is completed.
2.2 Please double click
from desktop to activate KMDS if needed.
(*The small icon
indicates the ready status. **After AP installation is completed, the AP is in your
computer. The KMDS can be automatically activated but please connect KM Switch with your computers before
turn on computers. ***If you exit the function or unplug KM Switch, you can click KMDS from the desktop to
activate).
C.
The Icon Status:
1. KM Switch function selected:
2. KVM PIP function selected:
(left-click on icon to pop-up or close)
3. Data transfer:
and pop-up window
4. The KMDS on computers is off-line:
5. The KMDS on computers is on-line:
6. The function display window :
Remote Control Function of KM Switch with a Single Keyboard and Mouse
When you start your computers every time, you can use the Remote Control function to type
password for the computer that is without the keyboard and mouse connected. And, you can
use this valuable function to activate KMDS of the computer if you click Exit
leave or unplug KM Switch.
to
1. Please connect the KM Switch with your two computers and then turn on both computers.
Click taskbar icon
and KM Switch
to switch.
English Manual
English 9
2. (During the process the screen
appears. This is to let you switch back to original computer to avoid any unforeseen
circumstances).
3. Now, you can type your password to start the computer.
4. The mouse cursor will be back to the original computer and then click KM switch
again to slide the mouse cursor to the other computer. Please follow the AP installation
procedures to select ICON PLAY or AP PLAY if needed.
The Application of Smart Transfer Cable with KM Switch
A.
This device lets you access two computers and associated monitors by sharing a single
keyboard and mouse. It is easy to move the cursor by a mouse sliding to control between two
computers.
B.
The Picture in Picture (PIP) mode is the value added to this device and is suitable for a
single display monitor.
English Manual
English 10
C.
This product also combines the Data-Link function allowing you to copy files on desktop
between two computers under KVM PIP mode or KM Switch mode.
D.
It is easy for you to cut and paste texts within KVM PIP mode or KM Switch mode.
Remark:
1. The file transfer and cut & paste text function: We recommend to use same operating
language between two computers to avoid error code happened.
2. The file transfer function: Only support desktop file transfer. Please note, the same file
name will be overwritten without further notice.
3. The Picture in Picture (PIP) mode: It is not suitable for media watching in inset window.
The PIP mode can only be activated with the computer that is connected with keyboard and
mouse.
4. Please do not unplug KM Switch device while the current data transfer is in progress or
KMDS is functional. This can cause the unforeseen loss of data or temporary inactive.
5.
6.
The PC authority should be a member of “ADMINISTRATORS” not “USERS”.
If any unforeseen circumstances occur during the use, you must click Exit to
leave function then unplug & plug both connectors of KM device and click
KMDS icon to activate.
7. Please note, we do not recommend users to use this device with OS Windows XP
(64bit) due to slow data transfer speed.
8.
The maximum resolution of monitor is up to 2,560 x 1,920 under KVM PIP mode.
Please select the screen resolution properly.
Radio Frequency Energy, Certifications
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation
CE Statement, EMC Compatibilty
This device complies with EN Standards EN55022 and EN55024 according to the relevant EC EMC Directive. It
must be used with shielded cables only to maintain EMC compatibility.
Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU und darf nur zusammen mit abgeschirmten
Kabeln verwendet werden.
LINDY Herstellergarantie
LINDY gewährt für dieses Produkt über die gesetzliche Regelung hinaus eine zweijährige Herstellergarantie ab
Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website aufgelistet bei den
AGBs.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical
and electronic equipment. The wheelie bin symbol shown indicates that this product must not be disposed of with
household waste. Instead the product must be recycled in a manner that is environmentally friendly. For more
information on how to dispose of this product, please contact your local recycling centre or your household waste
disposal service. Each individual EU member state has implemented the WEEE regulations into national law in
slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic
products.
More details can be obtained from your national WEEE recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und das
Recycling von Elektro- und Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung im Elektro-
und Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt. Dieses Gesetz verbietet vom 24.März 2006
an das Entsorgen von Elektro- und Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen
Sammelsystemen bzw. örtlichen Sammelstellen zugeführt werden! Dort werden sie kostenlos entgegen
genommen. Die Kosten für den weiteren Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
LINDY No 42617
1st Edition, March 2010
|